您要查找的是不是：
- Keywords Epoxy acrylate rubber;Thermally reversible covalent crosslinking;Thermally reversible conversion of covalent crosslinkage; 环氧型丙烯酸酯橡胶;热可逆共价交联剂;共价键的热可逆转化;
- Through vulcanization curves evaluation ammonium benzoate was selected as the vulcanizing agent of epoxy acrylate rubber (EACM). 通过硫化曲线评定，选用苯甲酸铵作硫化剂对环氧型丙烯酸酯橡胶低温胶进行硫化。
- 7.Through vulcanization curves evaluation ammonium benzoate was selected as the vulcanizing agent of epoxy acrylate rubber (EACM). 通过硫化曲线评定，选用苯甲酸铵作硫化剂对环氧型丙烯酸酯橡胶低温胶进行硫化。
- Keywords epoxy acrylates resin;esterify;UV-curing; 环氧丙烯酸酯;酯化;紫外光固化;
- 5.Through vulcanization curves evaluation ammonium benzoate was selected as the vulcanizing agent of epoxy acrylate rubber (EACM). 通过硫化曲线评定，选用苯甲酸铵作硫化剂对环氧型丙烯酸酯橡胶低温胶进行硫化。
- Keywords epoxy acrylates resin;hydrophilic;esterify;reaction condition; 环氧丙烯酸酯;顺酐;酯化;反应条件;
- Adipic acid modified epoxy acrylate pigment wetting and dispersing agent is synthesized. 合成了己二酸改性环氧丙烯酸酯颜料润湿分散剂;
- Epoxy acrylates are the workhorses of the industry. 环氧丙烯酸酯是这个产业的主流。
- The blend of acrylate rubber(ACM) and ethylene propylene diene terpolymer(EPDM) was prepared. 以丙烯酸酯橡胶(ACM)和三元乙丙橡胶(EPDM)为主要原料制备共混材料。
- Epoxy acrylate (EA) resin is an important photosensitive resin, in which bisp henolic epoxide was most widely used in the field of UV curing coating. 环氧丙烯酸(EA)树脂在辐射固化领域中是一种重要的感光树脂，其中双酚A型环氧树脂的应用最为广泛。
- The photocuring process of epoxy acrylate resin was studied by differential photo-calorimetric(DPC) method in this paper. 采用光差扫描量热法考察了环氧丙烯酸酯的光固化动力学行为。
- Keywords acrylate rubber;fluoro rubber;blend; 丙烯酸酯橡胶;氟橡胶;并用;
- To compare with epoxy acrylate, the film of modified epoxy acrylate have been improved more markedly on flexibility, glossiness and adhesive force. 和未改性树脂相比，涂膜的柔韧性显著提高，光泽度增加，附着力变好。
- Research progress of UV-curable oligomers which were mainly epoxy acrylate resin and polyurethane acrylate were reviewed. 摘要综述了UV固化低聚物（主要是环氧丙烯酸酯和聚氨酯丙烯酸酯）的研究进展。
- Blends of butyl rubber(IIR) and acrylate rubber(ACM) cured with phenol-formaldehyde resin were prepared,and the adhesive property of the blends to metal were studied. 制备了酚醛树脂硫化的丁基橡胶(IIR)/丙烯酸酯橡胶(ACM)共混物,并研究其与钢片的粘接性能。
- The title UV curing coatings is prepared based on epoxy acrylate, reactive diluents and photoinitiator.The main raw materials and cured film are tested with TGA. 以环氧丙烯酸酯、活性稀释单体、光引发剂等为原料,制备UV固化涂层,对主要原料及固化后的涂层进行了热失质量分析。
- The properties and manufacturing process of the pattern plate for moulding honeycomb composite of acrylate rubber and the application of the composite cured in the vacuum bag were described. 讨论了丙烯酸酯橡胶匀压垫的性能、成型工艺及蜂窝夹层结构/层压件复合材料在热压罐成型过程中的应用。
- The UV curable coating of fiber ribbon was prepared by blending bisphenol A epoxy acrylate(EA) and polyurethane acrylate(PUA)and adding reactive diluent,photoinitiator and pigment. 采用双酚A环氧丙烯酸酯(EA)和聚氨酯丙烯酸酯(PUA)共混,加入活性稀释剂、光引发剂、颜料等制备了紫外光固化光纤涂料。
- Keywords epoxy resin;rubber toughening;dielectric property;MWS model; 环氧树脂;橡胶增韧;介电性能;MWS模型;
- The result of performance test showed that the maleic anhydride and polyethylene glycol 400 monoester was the best to improve the viscosity of epoxy acrylate and the best mule ratio was 0.1. 实验结果表明：马来酸聚乙二醇400单酯改善体系黏度的效果最好且与环氧树脂的当量比为0.;1:1时最佳；
